NXP-PLV Modero PosiTrack Pilot Camera Controller

Designed with the camera operator in mind, the NXP-PLV includes a 7" Modero widescreen color-active touch panel with a video display, a proportional pan/tilt/zoom joystick and focus, iris, and speed controls. An external switch input provides hands-free selection of any system feature. A standards-based Ethernet interface allows easy connection and relocation. The NXP-PLV will control the PTE-300 or most other commercial pan/tilt heads.

The Modero G4 7" 16x9 Display and S-Video input provides clearer preview for widescreen applications using the optional NXA-AVB/ETHERNET Breakout Box. A standards-based Ethernet interface allows faster integration with existing network backbones and compatibility with the PTE-300 and NetLinx controllers. External input switch provides recall of camera preset, router switching, or any other control system function.

CONTROL

  • Integrated proportional joystick for zoom and pan/tilt
  • Side-mount wheel spins to adjust focus
  • Side-mount knob control iris
  • Side-mount knob trims response speed

DISPLAY: 7" diagonal widescreen color active-matrix LCD, 800 x 480 pixel resolution

INSTANT-ACCESS BUTTONS: 6 pushbuttons for camera selection

CONNECTIONS: 2-pin 3.5 mm male Phoenix connector for power, 1/4" female jack for external contact closure, RJ-45 for network communication, USB port for configuration and downloading of touch panel files

AUDIO/VIDEO IN: RJ-45 for audio/video to the panel up to 200’ over Cat5 (Requires optional NXA-AVB/Ethernet Breakout Box)

ENCLOSURE: Molded plastic enclosure

DIMENSIONS (HWD): 5" x 17 11/16" x 8 5/8" (126 mm x 450 mm x 217 mm)

WEIGHT: 5.65 lbs (2.56 kg)

 NXP-PLV Products default.asp Camera Controllers categoryCameraControllers.asp NXP-PLV NXP-PLV.asp FG630-100Modero PosiTrack Pilot Camera Controller
2008-09-29 Camera Controllers NXP-PLV Modero PosiTrack Pilot Camera Controller /techdocs/datasheets/NXP-PLV.Datasheet.pdf _blank PDF | 484 KB NXP-PLV 2008-10-06 Touch Panel Design Tools TPDesign4 2.10.606 /assets/applicationFiles/TPDesign4 2.10.606.exe _self EXE | 37.4 MB New Features:
  • New Panel Devices:
    • NXD-500i 5" Modero Touch Panel with Intercom
    • MVP-5150 5.2" Modero ViewPoint Wi-Fi Touch Panel
    • MVP-5100 5.2" Modero ViewPoint IR Touch Panel
  • Additional User IR Ports (MVP-5200i, MVP-5150, MVP-5100) - the Panel Properties page allows up to 8 user IR ports to be defined for the MVP-5200i, MVP-5150, and MVP-5100 panels
  • Additional Resolution (TPI-PRO)
    • The TPI-PRO will now support resolution 1680 x 1050 @ 60Hz
    • NOTE: Device must have firmware version 2.3.11 or greater
  • Restored download compatibility for NXP-TPI4 and TPI-PRO - Users will be able to download panel projects for other panel types to these devices
  • Warning when deleting image resources - The user can choose to receive a warning when deleting image resources from the project that are currently assigned to states or slots
 2008-10-06 TPDesign TPI-PRO MVP-5200i MVP-5150 MVP-5100 MVP-8400 MVP-8400i MVP-7500 NXT-1200VG RGB Kit NXD-1200VG RGB Kit NXT-1200VG Video Kit NXD-1200VG Video Kit NXT-1500VG RGB Kit NXD-1500VG RGB Kit NXT-1500VG Video Kit NXD-1500VG Video Kit NXT-1700VG RGB Kit NXD-1700VG RGB Kit NXT-1700VG Video Kit NXD-1700VG Video Kit NXT-1200V NXD-1200V NXD-500i NXD-CV5 NXD-700Vi NXT-CV7 NXD-CV7 NXD-1000Vi NXT-CV10 NXT-CV10/PB NXD-CV10 MIO R-4 NXP-PLV 2008-06-10 Camera Controllers Modero PosiTrack Pilot Camera Controller Firmware 2.80.18 /assets/firmwareFiles/SW630-100_NXP-PLV_v2_80_18.kit _self KIT | 10.9 MB

NOTE: Joystick recalibration is required after firmware upgrades. When used with a PTE-300 pan/tilt head, the PTE-300 firmware must be upgraded to v1.21 or later. The PTE-300 Duet module and user interface TP4 file are available for download by searching Device Model PTE-300 from the InConcert Resource Center on amx.com.

New Features:
  • Native 12-bit sampling is used for camera controls
  • Eliminated math errors due to clock adjustments
  • Reduced message traffic to master
  • Joystick and knob levels can now be enabled/disabled. By default, the following levels are enabled: 4,5,7,8,9
  • Joystick and knob levels can now be set to 8-bit or 16-bit resolution. By default, the following levels are 8-bit: 1,2,7,8,9,10,11. By default, the following levels are 16-bit: 3,4,5,6
  • Added Send Commands ?PLL, ^PLE, ^PLD, ^PLR
 2008-06-10 NXP-PLV Camera Controllers NXP-PLV /assets/logosAndPhotos/NXP-PLV.png /assets/logosAndPhotos/thumbnails/NXP-PLV.jpg _blank PNG | 3.60 MB NXP-PLV 2 2008-06-14 Camera Controllers Installation Guide - EXP-PT1370 NXP-PLV and PT-300 Experience Kit /techdocs/EXP-PT1370.InstallationGuide.pdf _blank 2008-06-14 REV B PDF | 164 KB EXP-PT1370 NXP-PLV PTE-300 2008-06-04 Camera Controllers Operation/Reference Guide - NXP-PLV Modero PosiTrack Pilot Camera Controller /techdocs/NXP-PLV.OperationReferenceGuide.pdf _blank 2008-06-04 PDF | 1.96 MB NXP-PLV 2007-06-04 Camera Controllers Installation Guide - NXP-PLV Modero PosiTrack Pilot Camera Controller /techdocs/NXP-PLV.InstallationGuide.pdf _blank 2007-06-04 REV C PDF | 110 KB NXP-PLV 2007-05-15 Camera Controllers NXP-PLV Modero PosiTrack Pilot Presentation /assets/presentations/AMX.Modero.PosiTrackPilot.pps PPS | 1.68 MB _blank NXP-PLV PTE-300: PosiTrack Ethernet Pan/Tilt Head FG630-65PTE-300.asp_self PM-CAM: Camera Ceiling/Pedestal Mount FG630-42PM-CAM.asp_self TM-CAM: Camera Tripod Mount FG630-43TM-CAM.asp_self WM-CAM: Camera Wall Mount FG630-41WM-CAM.asp_self PSN4.4: 13.5 VDC, 4.4 A Power Supply with 3.5 mm Phoenix Connector FG423-45PSN4.4.asp_self NXA-AVB/ETHERNET: Audio/Video Breakout Box with Composite Video and Ethernet FG2254-10NXA-AVB-ETHERNET.asp_self