OVERVIEW
The Anterus RFID Reader increases the capabilities of an integrated
A/V or control system. Use the ANT-RDR with the NetLinx controller
to trigger system events or notify administrators by simply walking
into or out of a room with an Anterus RFID asset tag or ID badge.
COMMON APPLICATION
The Anterus Reader quickly locates assets, equipment, or people
connected with Anterus tags or badges. It is ideal for a variety of
locations including: meeting rooms, hospitals, hotels, classrooms,
network operation centers, or retail stores, just to name a few.
FEATURES
- Identifies and locates assets or personnel within an Anterus monitored zone
- Initiates system macros, presets, or user preferences based on recognition of an Anterus RFID tag
- Integrates with AMX’s Resource Management Suite or can be used as a stand-alone solution for NetLinx masters
- Secures fixed assets, such as large stationary equipment, not traditionally connected to an RMS-supported control system
SPECIFICATIONS
DIMENSIONS (HWD)
- 1” x 2 1/2” x 3 1/2” (2.3 cm x 6.4 cm x 8.7 cm); does not include antenna
- RU: 1
WEIGHT
4 oz (113g)
POWER REQUIREMENT
- Constant current draw: 1.3 A @ 12 VDC
- Startup current draw: 1.3 A @ 12 VDC
MINIMUM POWER SUPPLY REQUIRED
14.5 VDC @ 30 mA
ENCLOSURE
Black Metal Powder coat
FRONT PANEL COMPONENTS
- RF Status LED (red): Indicates reception from RFID tag
- AXLINK Status LED (green): Blinks to indicate the device is installed and communicating properly. Solid ON = Power on, but no master connection. Solid OFF = No power
- RF Stub Antenna (433.92 MHz)
REAR PANEL COMPONENTS
- AxLink connector – 4-pin 3.5 mm mini-Phoenix (male) connector provides data and power to the ANT-RDR.
- DEVICE ID 8-position DIP Switch – Used to set the unique binary device number. The device number is set by the total value of DIP switch positions that are ON (down).
ENVIRONMENTAL
- Operating Temperature: 32° F to 140° F (0° C to 60° C)
- Storage Temperature: -4° F to 158° F (-20° C to 70° C)
- Humidity: 5% to 90% (non condensing)
- Heat Dissipation Typical: 12 BTU/hr
DETECTION RANGE
Up to 100 feet/30 meters
READER FREQUENCY
433.92 MHz
Learn important installation, configuration and programming techniques in the following course(s) from AMX University:
- Getting Started with Anterus (Online)
- Anterus Configuration (Online)
For schedules and registration for these and any AMX University courses, visit www.amx.com/training.
DID YOU KNOW?
A tiny battery inside the Anterus Tag keeps them transmitting the location of the asset they are connected to 24/7/365 for up to five years without needing to charge or replace them.
TRAINING AVAILABLE
Learn important installation, configuration and programming techniques in the following course(s) from AMX University:
- Getting Started with Anterus (Online)
- Anterus Configuration (Online)
For schedules and registration for these and any AMX University courses, visit www.amx.com/training.
AWARD WINNING PRODUCTS
2007 InfoComm Hot Products
ProAV magazine evaluates all of the exhibitors' new products announced at the show and awards "InfoComm Hot Products" awards. This year, AMX was the first company ever to receive two "Hot Products Awards" from Pro AV – for the Anterus RFID product and for the Inspired Signage solution.
2007 InfoComm Pick Hit
The Anterus RFID solution was also awared an "InfoComm Pick Hit" by the editors of Sound & Video Contractor.
